Build forge license

Branches Tags. Could not load branches. Could not load tags. Latest commit. Git stats 22 commits. Failed to load latest commit information. Forms API. Photos API. View code. What next?

Blogs: License Written by. You can learn how to install and use Postman from here. You can download the Postman installer from here. Settings about license server are correct. In the SystemOut. The buildForge version is 8. Ryan Ruscett 1. Hello, You need to make sure you have a licenses for the users as well as licenses for the BF Engine. I would open a ticket with licensing support to ensure that you have the correct licenses.

Hi Antonio, did you find the solution? Im facing similar behavior. The steps to solving this issue are as follows. When you install build forge you enter a license server. If you didn't or put in the wrong value. If you are going to use it for long term work at frequent intervals, you may want to enclose it in a woodshed or building, but this will require ducting the excessive heat out of the work space, so we will look more along the lines of hobby work, and assembling it in an outdoor area.

Form up a concrete foundation for your forge. A fairly useful size and configuration might be about 19X29 inches. Install reinforcement bars, and place concrete in the form. Float the concrete flat and fairly smooth. Lay up about 24 inches Leave an opening in the back "wall" of this box for removing ash from the fire pit, about 12X12 inches. You may decide later to have a metal door built for this, but that really doesn't matter. Leave an opening for the forced air supply piping either in the side or front of this box, as well.

Fashion a metal pan or fire pit liner to fit over the walls of the brick box you have laid up. This should have a depression of about 3 or 4 inches 7. It must be strong enough to support the fire brick liner or packed clay which is the base for the fire. You will need a hole near the center of the depressed area of the pit liner for the fresh air supply pipe described earlier. Lay your fire pit floor using fire brick or soapstone brick and mortar mixed with fire clay to withstand the high temperatures of your forge.

You will want one layer of brick to line the fire pit "floor" so that the metal pit form does not burn out from the high temperatures. The sides should be laid up with fire brick and mortar to form a ledge to support the work pieces or tongs with which you will hold your workpiece. The working height of this ledge depends on how tall the forge-worker, or smith, is. Waist high is a good average height. Lay up regular clay brick for your sides in a hearth type configuration if you like, to draft the smoke and heat away from the work ledge and fire pit.

This is not absolutely necessary, but helps keep the temperature more comfortable at the front of the forge. Allow all of the masonry work to "cure" for a reasonable length of time. Depending on climate, this is usually 28 days. If you are anxious to begin using the forge sooner, build a small "curing" fire in the fire pit to temper the masonry before getting it really hot.

Yes, but you need to have something to blow air into your forge to ensure that the forge gets hot enough. You will also need a lot of wood since wood at this temperature will burn up quickly. If you can, it would be better to use charcoal.

Yes No. Not Helpful 1 Helpful If you decide to use coal, blacksmithing coal is the best option. Not Helpful 2 Helpful Go to a town where a lot of people use coal for heat, and check hardware stores in that area. Not Helpful 4 Helpful 6. Coal would work fine, but charcoal is more efficient and better for your health. Most coal is washed, and may be harmful to your lungs over long periods of time.